As a common stamping process in the manufacturing industry, stamping manipulators have also been widely used in recent years. The stamping manipulators are used to replace manual labor to realize processing processes such as automatic loading and unloading. It can also be programmed to complete a variety of anticipated tasks. So what problems should stamping robot manufacturers pay attention to at the beginning of design?

Non-standard robot

As a common stamping process in manufacturing industry, stamping manipulator has been widely applied in recent years, and automatic machining technology is realized instead of manual operation by stamping manipulator. It can also be programmed to complete a variety of expected task tasks. So what are the problems that should be paid attention to at the beginning of the design of the stamping manipulator manufacturer?

First, the mold must be strict, the lower mold must be consistent, the maximum difference is ± 5MM, the discharge should be smooth, and there should be a guide pin.

First, the mold needs to be strict, the lower mold should be consistent, the maximum difference of + 5MM, remove material to smooth, and have guide pin.

2. For the on-line punching robot, the mold needs to be erected to the center of the punch and within 2 meters of the center of the punch.

Two. For online punching manipulator, it needs to be set up to the center of the punch and within 2 meters of the punch center.

3. For a single stamping robot, the center distance requirements are the same, and the arm must travel the same distance.

Three, a single punching manipulator, the center distance is equal, and the distance of the arm is the same.

Multi-machine connection punching manipulator is also called connecting rod manipulator. Among them, multiple machines can be punches, hydraulic presses or hydraulic presses. It is mainly designed for multi-process and each process needs to operate independently. It is suitable for occasions with large product demand, low frequency of machine switching, and drawing and stamping of flat products.

Multi machine line pressing manipulator also called rod type manipulator, which can be multiple refers to the punch, as well as hydraulic or hydraulic machine, it is mainly aimed at multi process and each process to work independently, the design of hand punch machine, suitable for the demand of the products, machine for switching frequency the high, flat products stretch stamping occasions.

Multi-station punching manipulator is used to process parts on multi-station punching machine. The robot will automatically load and unload material to the punching machine, and realize the conversion of semi-finished parts between seven stations. The punch manipulator is mainly driven by an air cylinder, which enables the arm to perform telescopic, traversing and lifting movements, and uses hydraulic buffers to achieve buffering respectively.

The multi station punch manipulator is used for machining parts on multi station punch press, and the manipulator is used to punch and batch automatically to punch press, and realizes semi-finished parts conversion between seven workstations. The punch manipulator is driven mainly by the cylinder , so that the arm is telescopic, transversed and lifted, and the buffer is realized by the hydraulic buffer.

The above three points are some suggestions that should be paid attention to in detail when designing the commonly used multi-station press manipulators and multi-machine connection press manipulators. Deqi Intelligent Technology (Shanghai) Co., Ltd. is a national high-tech manufacturer specializing in the research, development, production and sales of punching robots, loading and unloading robots, punching robots, industrial robots, and non-standard automation equipment. Non-standard robots contact Deqi Intelligent Technology (Shanghai) Co., Ltd.